BIFL cookware (pots & pans) for induction
-
What’s your favorite brand of BIFL cookware for induction?
I’m looking to upgrade my kitchen with industrial-quality pots and pans. After about a month of searching, I came to the conclusion that the most important requirements are:
- 3-ply (or 5-ply). Fully clad (not just the bottom disc).
- 18/8 or 18/10 stainless steel on the inside
- 18/0 (or 200- or 400-grade) magnetic stainless steel on the outside.
- Thick layers of metal (ideally >= 3mm of aluminum)
- Strong, serviceable rivets on handles (not welded)
- Handles on both sides of the pot (helper handle)
- Handles have a hole in them on the end (for hanging)
- Fits a 28 cm (or 11”) lid (easily replaceable standard size that’s interchangeable between metric and dumb units)
- Top rim should either have a pour spout or flared lip (for easier pouring)
- NSF certified
From what I’ve read, stainless steel isn’t a very good conductor (NIST says that aluminum transfers heat 16x better than stainless steel). But stainless steel is a better surface to cook-on, because it’s less reactive and won’t absorb flavours. So, 3-ply sandwiches a thick aluminum layer between two different types of stainless steel (nickle-free [eg 18/0 or 200- or 400-grade] on the outside, which – though less corrosion resistant – is important for it to work on an induction cooktop) and either 18/8 or 18/10 on the inside.
5-ply is also a thing, but my research suggests that it doesn’t really matter how many layers. What’s more important is the thickness of the material.
And that’s why I’m here. Because, confoundedly, the manufacturers of these pots don’t seem to even know how thick the layers of their 3-ply cookware is!
Ideally I’d just find the technical specifications of their cookware on their website, make a spreadsheet, and then buy the one with the thickest material (or close to the thickest, depending on my trade-off between quality vs weight & cost).
But I’ve called maybe a dozen manufacturers, and none seem to know the specifications of their own cookware
So, fediverse, I ask you: does anyone know what the thickness of the layers in these manufacturer’s 3-ply cookware is? Otherwise, what’s been your experience? How do you feel about these brands? Is there some other one (not listed) that you prefer?
- Browne Thermalloy
- All-Clad
- Made-in
- Tramontina
- Cuisinart
- Other?
Edit: I should be clear that I’m specifically asking about 3-ply or 5-ply stainless steel cookware. This is for a community house, so I need something that can be (ab)used by housemates who don’t know or care for the seasonings on the pans. And I don’t want cast iron, because it’s more likely to break the glass-topped induction cooktop.
For what its worth Alton Brown and Chris Young, use All-Clad in their videos. Both are more “scientific” chefs. Alton is my preferred of the two, but both are more data driven than most chefs.
As for myself, I use cast iron when I need more thermal momentum, and stainless when it doesn’t matter as much. I’ve got a mix of All-Clad and one brand that I haven’t seen mentioned is Viking. They’ve both been excellent over the course of a few years, cooking 2-3 meals a day every day. The handles are still rock solid which I’ve found to be an issue with other cookware.
Bonus: both brands can be found in relative abundance at consignment stores for “cheap”. My cast iron is from local thrift stores or estate sales, but the stainless stuff I tend to buy “new” at Sierra or Home Goods. Each pot and or pan is somewhere in the neighborhood of $20-40 and is BIFL quality.
Alton discusses induction and pan interactions in this video
Chris’ dedicated video on his preferred pans -
You’re very wrong. Aluminum does not work with induction. Its not ferrous so it can’t interact with the induction coils. Thats just scientific fact.
Many stainless pans do have an aluminum core, but they also have a ferrous metal layer that allows them to be compatible with induction burners. Its not the aluminum thats interacting with the induction top at all. The aluminum is just there for even heat distribution on gas and electric cooktops, or to cut weight and make them more user friendly.
-
I have a Demeyere Industry pan.
It’s fully 5 layers of steel and aluminum with a welded handle.
No rivets as they get loose all the time. Plus I hate the fats and oils that get in there with no way to clean them. Plus utensils get caught in it when you’re making thicker sauces.
They are also found in the commercial kitchen industry.
I’ve baked with it, fried in it, abused it petty hard, and never gives me an issue.
That brand kept coming in my research as having very thick layers.
-
This article is great, thanks for sharing
Here’s the conclusion at the end:
What to buy instead
The counter-list in this category runs deeper than any I’ve covered previously, because cookware is simple enough that stubborn, family-run businesses can still compete. The pattern in who survived is uniform: nobody outside the family has ever been owed a return.
…Stainless and carbon steel
- All-Clad: The bonded lines are still made in Canonsburg, Pennsylvania, sharp-rim settlement and French owner notwithstanding.
- Heritage Steel: Family-owned in Clarksville, Tennessee, building on old Vollrath tooling. The fully American clad alternative.
- Tramontina: Family-controlled in Brazil. The honest value play; their clad line embarrasses pans at twice the price.
- de Buyer: The carbon steel standard, still made in the Vosges. It belongs to Groupe SEB as of January 2025, so it’s one to watch over the next few years.
- Matfer Bourgeat: The French commercial standard, family-held, and what a lot of commercial kitchens use.
That said, Tramontina was one of the companies I contacted. They also said they didn’t know the thickness of the metal in their own cookware. Maybe I’d have a different experience if I called them in Brazil and spoke Portuguese
I’m also shocked that the article doesn’t mention Browne Thermalloy. I think they’re one of the best cookware brands on the market, but I can’t find any third-party reviews on the Internet about them – except one small thread on reddit. Browne’s support couldn’t tell me the metal thickness in their 3-ply cookware, but they said they’d forward my request “to their marketing department” (not sure why not their “procurement” or “engineering” or “product” departments), and I haven’t heard back…
-
For what its worth Alton Brown and Chris Young, use All-Clad in their videos. Both are more “scientific” chefs. Alton is my preferred of the two, but both are more data driven than most chefs.
As for myself, I use cast iron when I need more thermal momentum, and stainless when it doesn’t matter as much. I’ve got a mix of All-Clad and one brand that I haven’t seen mentioned is Viking. They’ve both been excellent over the course of a few years, cooking 2-3 meals a day every day. The handles are still rock solid which I’ve found to be an issue with other cookware.
Bonus: both brands can be found in relative abundance at consignment stores for “cheap”. My cast iron is from local thrift stores or estate sales, but the stainless stuff I tend to buy “new” at Sierra or Home Goods. Each pot and or pan is somewhere in the neighborhood of $20-40 and is BIFL quality.
Alton discusses induction and pan interactions in this video
Chris’ dedicated video on his preferred pansUnfortunately I can’t use YouTube. Do you have a link to the source articles? Or a video on PeerTube?
-
That brand kept coming in my research as having very thick layers.
If it’s any consolation the Ikea 365 stainless steel are my alternative workhorse. They’re cheap and abused as well. Maybe something replaceable but still sturdy is worthwhile.
-
You’re very wrong. Aluminum does not work with induction. Its not ferrous so it can’t interact with the induction coils. Thats just scientific fact.
Many stainless pans do have an aluminum core, but they also have a ferrous metal layer that allows them to be compatible with induction burners. Its not the aluminum thats interacting with the induction top at all. The aluminum is just there for even heat distribution on gas and electric cooktops, or to cut weight and make them more user friendly.
I’m willing to be corrected if I’m wrong.
However, if you run a high current through a coiled mains extension cord, you create a fire hazard because it heats up due to induction. No ferrous metals involved, just the copper or aluminium conductors in the cable. Don’t induction hobs work on a similar principle?
-
This article is great, thanks for sharing
Here’s the conclusion at the end:
What to buy instead
The counter-list in this category runs deeper than any I’ve covered previously, because cookware is simple enough that stubborn, family-run businesses can still compete. The pattern in who survived is uniform: nobody outside the family has ever been owed a return.
…Stainless and carbon steel
- All-Clad: The bonded lines are still made in Canonsburg, Pennsylvania, sharp-rim settlement and French owner notwithstanding.
- Heritage Steel: Family-owned in Clarksville, Tennessee, building on old Vollrath tooling. The fully American clad alternative.
- Tramontina: Family-controlled in Brazil. The honest value play; their clad line embarrasses pans at twice the price.
- de Buyer: The carbon steel standard, still made in the Vosges. It belongs to Groupe SEB as of January 2025, so it’s one to watch over the next few years.
- Matfer Bourgeat: The French commercial standard, family-held, and what a lot of commercial kitchens use.
That said, Tramontina was one of the companies I contacted. They also said they didn’t know the thickness of the metal in their own cookware. Maybe I’d have a different experience if I called them in Brazil and spoke Portuguese
I’m also shocked that the article doesn’t mention Browne Thermalloy. I think they’re one of the best cookware brands on the market, but I can’t find any third-party reviews on the Internet about them – except one small thread on reddit. Browne’s support couldn’t tell me the metal thickness in their 3-ply cookware, but they said they’d forward my request “to their marketing department” (not sure why not their “procurement” or “engineering” or “product” departments), and I haven’t heard back…
You’re welcome.
I will add, not related to pans. I bought a set of 2 serrated steak knives about 12+ years ago, they are Tramontina and the quality has been amazing. Still sharp, no rust, looks almost new still. -
Might I suggest a strata carbon steel clad pan? Their normal pan (don’t get their work) is stainless steel bottomed, aluminium cored, and carbon steel topped. You can season your pan and truly become attached to it; if you fuck up, you can just restart. As a bonus, it’s as light as a normal pan instead of carbon steel or the chonky cast iron. Only bad thing is that the edge is unsealed, but that’s really only an issue if you dishwash it. You shouldn’t be dishwashing carbon steel anyways.
I think if you want BIFL, it has to have seasoning in some way. Even stainless steel pits (pitts?).
Even when I moved on from my cast iron to the above pan, I still use my old one at my pops place
Do you mean you shouldn’t put them in the dishwasher or fully submerge them in water?
-
Do you mean you shouldn’t put them in the dishwasher or fully submerge them in water?
I think submerging unsealed pans is okay, just not for an extended amount of time because of rusting
-
I was too snarky in my reply. Sorry about that. I fall into a habit of being too negative on the internet, but where you’re confused is how current enters the loop of wire. The situation your describing is resistive heat based on pushing electrical current through the wire. That would be conduction not induction.
-
haven’t had one fail yet
It it even possible for an uncoated pot or pan to fail, other than by melting? Ok I’ve had some handles come loose, but that’s tolerable or probably fixable.
I had a secondhand pot that had a second bottom stuck on to even out the heating as far as I could tell. It fell off. Maybe fixable.
I had it for 10 years so I was satisfied I got my money’s worth and bought myself a much nicer pot.
-
Unfortunately I can’t use YouTube. Do you have a link to the source articles? Or a video on PeerTube?
Sorry, I don’t. Pretty sure that they’re only on YouTube
-
I was too snarky in my reply. Sorry about that. I fall into a habit of being too negative on the internet, but where you’re confused is how current enters the loop of wire. The situation your describing is resistive heat based on pushing electrical current through the wire. That would be conduction not induction.
Thank you, I stand corrected.
-
I think there are two mindsets in BIFL communities that somewhat diametrically oppose each other. There’s the “I’m tired of buying cheap crap that falls apart when I use it; recommend me an economical drop in that I can mildly abuse and it won’t fall apart,” and there’s the “I have some money and want to spend it wisely on really nice stuff that my descendents will fight over because it’s so nice and still going strong.”
Obviously there are others and it’s a continuum, but I think a lot of people talk past each other because they might recommend e.g. hugely expensive heirloom pans for your great grandkids to admire, when what OP wants is something that can take a beating from randos and still work fine or be recoverable. Or, conversely, someone else might be looking for that recommendation of beautiful sauciers to proudly have on display on their pot rack, and what they’re recommended is crusty thrift-store lodges that they have to refinish themselves.
I think those are where it started from but the BIFL sub degraded into a community built around obsessive buying of the “right” stuff.
I have a cheap nonstick pan. I use it like five times a year. I’m fine with that. Regular stainless pots and pans will last well over a decade unless you start dropping them on the floor twice a week, even if they’re not as fancy as the stuff that gets advertised as BIFL. It’s not that complicated
-
No problem! Sorry again for the snark. No one willing to learn should be met with that sort of hostility. Its a relatively new and complicated technology, so it’s not intuitive unless you’re already familiar with it. Instead I should have explained it in a way that garners enthusiasm to explore the principal cause its pretty cool
-
What’s your favorite brand of BIFL cookware for induction?
I’m looking to upgrade my kitchen with industrial-quality pots and pans. After about a month of searching, I came to the conclusion that the most important requirements are:
- 3-ply (or 5-ply). Fully clad (not just the bottom disc).
- 18/8 or 18/10 stainless steel on the inside
- 18/0 (or 200- or 400-grade) magnetic stainless steel on the outside.
- Thick layers of metal (ideally >= 3mm of aluminum)
- Strong, serviceable rivets on handles (not welded)
- Handles on both sides of the pot (helper handle)
- Handles have a hole in them on the end (for hanging)
- Fits a 28 cm (or 11”) lid (easily replaceable standard size that’s interchangeable between metric and dumb units)
- Top rim should either have a pour spout or flared lip (for easier pouring)
- NSF certified
From what I’ve read, stainless steel isn’t a very good conductor (NIST says that aluminum transfers heat 16x better than stainless steel). But stainless steel is a better surface to cook-on, because it’s less reactive and won’t absorb flavours. So, 3-ply sandwiches a thick aluminum layer between two different types of stainless steel (nickle-free [eg 18/0 or 200- or 400-grade] on the outside, which – though less corrosion resistant – is important for it to work on an induction cooktop) and either 18/8 or 18/10 on the inside.
5-ply is also a thing, but my research suggests that it doesn’t really matter how many layers. What’s more important is the thickness of the material.
And that’s why I’m here. Because, confoundedly, the manufacturers of these pots don’t seem to even know how thick the layers of their 3-ply cookware is!
Ideally I’d just find the technical specifications of their cookware on their website, make a spreadsheet, and then buy the one with the thickest material (or close to the thickest, depending on my trade-off between quality vs weight & cost).
But I’ve called maybe a dozen manufacturers, and none seem to know the specifications of their own cookware
So, fediverse, I ask you: does anyone know what the thickness of the layers in these manufacturer’s 3-ply cookware is? Otherwise, what’s been your experience? How do you feel about these brands? Is there some other one (not listed) that you prefer?
- Browne Thermalloy
- All-Clad
- Made-in
- Tramontina
- Cuisinart
- Other?
Edit: I should be clear that I’m specifically asking about 3-ply or 5-ply stainless steel cookware. This is for a community house, so I need something that can be (ab)used by housemates who don’t know or care for the seasonings on the pans. And I don’t want cast iron, because it’s more likely to break the glass-topped induction cooktop.
First of all test your existing cookware with a small magnet, if it sticks it will work with induction. Cuisinart and Tramontina have both been great. I actually prefer using stainless steel because the handles don’t get hot.
-
What’s your favorite brand of BIFL cookware for induction?
I’m looking to upgrade my kitchen with industrial-quality pots and pans. After about a month of searching, I came to the conclusion that the most important requirements are:
- 3-ply (or 5-ply). Fully clad (not just the bottom disc).
- 18/8 or 18/10 stainless steel on the inside
- 18/0 (or 200- or 400-grade) magnetic stainless steel on the outside.
- Thick layers of metal (ideally >= 3mm of aluminum)
- Strong, serviceable rivets on handles (not welded)
- Handles on both sides of the pot (helper handle)
- Handles have a hole in them on the end (for hanging)
- Fits a 28 cm (or 11”) lid (easily replaceable standard size that’s interchangeable between metric and dumb units)
- Top rim should either have a pour spout or flared lip (for easier pouring)
- NSF certified
From what I’ve read, stainless steel isn’t a very good conductor (NIST says that aluminum transfers heat 16x better than stainless steel). But stainless steel is a better surface to cook-on, because it’s less reactive and won’t absorb flavours. So, 3-ply sandwiches a thick aluminum layer between two different types of stainless steel (nickle-free [eg 18/0 or 200- or 400-grade] on the outside, which – though less corrosion resistant – is important for it to work on an induction cooktop) and either 18/8 or 18/10 on the inside.
5-ply is also a thing, but my research suggests that it doesn’t really matter how many layers. What’s more important is the thickness of the material.
And that’s why I’m here. Because, confoundedly, the manufacturers of these pots don’t seem to even know how thick the layers of their 3-ply cookware is!
Ideally I’d just find the technical specifications of their cookware on their website, make a spreadsheet, and then buy the one with the thickest material (or close to the thickest, depending on my trade-off between quality vs weight & cost).
But I’ve called maybe a dozen manufacturers, and none seem to know the specifications of their own cookware
So, fediverse, I ask you: does anyone know what the thickness of the layers in these manufacturer’s 3-ply cookware is? Otherwise, what’s been your experience? How do you feel about these brands? Is there some other one (not listed) that you prefer?
- Browne Thermalloy
- All-Clad
- Made-in
- Tramontina
- Cuisinart
- Other?
Edit: I should be clear that I’m specifically asking about 3-ply or 5-ply stainless steel cookware. This is for a community house, so I need something that can be (ab)used by housemates who don’t know or care for the seasonings on the pans. And I don’t want cast iron, because it’s more likely to break the glass-topped induction cooktop.
I’ve had great luck with Calphalon.
-
What’s your favorite brand of BIFL cookware for induction?
I’m looking to upgrade my kitchen with industrial-quality pots and pans. After about a month of searching, I came to the conclusion that the most important requirements are:
- 3-ply (or 5-ply). Fully clad (not just the bottom disc).
- 18/8 or 18/10 stainless steel on the inside
- 18/0 (or 200- or 400-grade) magnetic stainless steel on the outside.
- Thick layers of metal (ideally >= 3mm of aluminum)
- Strong, serviceable rivets on handles (not welded)
- Handles on both sides of the pot (helper handle)
- Handles have a hole in them on the end (for hanging)
- Fits a 28 cm (or 11”) lid (easily replaceable standard size that’s interchangeable between metric and dumb units)
- Top rim should either have a pour spout or flared lip (for easier pouring)
- NSF certified
From what I’ve read, stainless steel isn’t a very good conductor (NIST says that aluminum transfers heat 16x better than stainless steel). But stainless steel is a better surface to cook-on, because it’s less reactive and won’t absorb flavours. So, 3-ply sandwiches a thick aluminum layer between two different types of stainless steel (nickle-free [eg 18/0 or 200- or 400-grade] on the outside, which – though less corrosion resistant – is important for it to work on an induction cooktop) and either 18/8 or 18/10 on the inside.
5-ply is also a thing, but my research suggests that it doesn’t really matter how many layers. What’s more important is the thickness of the material.
And that’s why I’m here. Because, confoundedly, the manufacturers of these pots don’t seem to even know how thick the layers of their 3-ply cookware is!
Ideally I’d just find the technical specifications of their cookware on their website, make a spreadsheet, and then buy the one with the thickest material (or close to the thickest, depending on my trade-off between quality vs weight & cost).
But I’ve called maybe a dozen manufacturers, and none seem to know the specifications of their own cookware
So, fediverse, I ask you: does anyone know what the thickness of the layers in these manufacturer’s 3-ply cookware is? Otherwise, what’s been your experience? How do you feel about these brands? Is there some other one (not listed) that you prefer?
- Browne Thermalloy
- All-Clad
- Made-in
- Tramontina
- Cuisinart
- Other?
Edit: I should be clear that I’m specifically asking about 3-ply or 5-ply stainless steel cookware. This is for a community house, so I need something that can be (ab)used by housemates who don’t know or care for the seasonings on the pans. And I don’t want cast iron, because it’s more likely to break the glass-topped induction cooktop.
I bought a large MadeIn griddle for my induction stove and I have buyers remorse. Its just too thin, too little thermal conduction. It merely cooks in a circle directly over the two coils and no where else. Its bad even with a long pre-heat.
-
What’s your favorite brand of BIFL cookware for induction?
I’m looking to upgrade my kitchen with industrial-quality pots and pans. After about a month of searching, I came to the conclusion that the most important requirements are:
- 3-ply (or 5-ply). Fully clad (not just the bottom disc).
- 18/8 or 18/10 stainless steel on the inside
- 18/0 (or 200- or 400-grade) magnetic stainless steel on the outside.
- Thick layers of metal (ideally >= 3mm of aluminum)
- Strong, serviceable rivets on handles (not welded)
- Handles on both sides of the pot (helper handle)
- Handles have a hole in them on the end (for hanging)
- Fits a 28 cm (or 11”) lid (easily replaceable standard size that’s interchangeable between metric and dumb units)
- Top rim should either have a pour spout or flared lip (for easier pouring)
- NSF certified
From what I’ve read, stainless steel isn’t a very good conductor (NIST says that aluminum transfers heat 16x better than stainless steel). But stainless steel is a better surface to cook-on, because it’s less reactive and won’t absorb flavours. So, 3-ply sandwiches a thick aluminum layer between two different types of stainless steel (nickle-free [eg 18/0 or 200- or 400-grade] on the outside, which – though less corrosion resistant – is important for it to work on an induction cooktop) and either 18/8 or 18/10 on the inside.
5-ply is also a thing, but my research suggests that it doesn’t really matter how many layers. What’s more important is the thickness of the material.
And that’s why I’m here. Because, confoundedly, the manufacturers of these pots don’t seem to even know how thick the layers of their 3-ply cookware is!
Ideally I’d just find the technical specifications of their cookware on their website, make a spreadsheet, and then buy the one with the thickest material (or close to the thickest, depending on my trade-off between quality vs weight & cost).
But I’ve called maybe a dozen manufacturers, and none seem to know the specifications of their own cookware
So, fediverse, I ask you: does anyone know what the thickness of the layers in these manufacturer’s 3-ply cookware is? Otherwise, what’s been your experience? How do you feel about these brands? Is there some other one (not listed) that you prefer?
- Browne Thermalloy
- All-Clad
- Made-in
- Tramontina
- Cuisinart
- Other?
Edit: I should be clear that I’m specifically asking about 3-ply or 5-ply stainless steel cookware. This is for a community house, so I need something that can be (ab)used by housemates who don’t know or care for the seasonings on the pans. And I don’t want cast iron, because it’s more likely to break the glass-topped induction cooktop.
I’ve done cooking & baking classes at a community house and we used the Ikea “365” range of stainless steel pots and pans, with metal lids. They’re fairly cheap but induction compatible and stand up to a fair amount of abuse.
