AKG Q701 - These headphones just won't die
-
I have a set of K553 PROs that don’t die. I’ve had to epoxy the audio cable back into the can and replace the foam twice, but they’re still going after 10 years. Love these things.
Those are basically a closed-back version of mine, right? They look badass.
-
Those are basically a closed-back version of mine, right? They look badass.
Yours have that sweet leather strap and a different connection. I am not sure if the drivers are the same. Either way, I got these off of MassDrop before it was enshittified.
-
Yours have that sweet leather strap and a different connection. I am not sure if the drivers are the same. Either way, I got these off of MassDrop before it was enshittified.
Damn, those look sick! Are they over the ear or on-ear? Hard to drive? I might pick up a pair to use at the office since open-back isn’t a great choice for that environment.
Btw the leather band on my Q701 isn’t stock. It’s just scrap leather that I cut to shape when my old headband wore out. Got the scrap for free on a recycling group.
-
I replaced the pads on my AKG Q701 headphones today for the 4th time. It made me realize that I’ve used these headphones for at least 40 hours a week for 14 years straight. I’ve had to repair the left side speaker solder joint a few times, but they’re designed to be easily torn down and repaired. Truly BIFL headphones.
I’ve heard that the newer AKG K702 headphones are identical but I can’t vouch for that. They go for around $250.
AKG K702, $600 Canadian. Too bad.
️ -
AKG K702, $600 Canadian. Too bad.
️You can order them from thomann but you’d have to pay for international shipping. Probably still cheaper though.
https://www.thomannmusic.com/akg_k702.htm
There’s also the k712 if you like more bass:
-
I replaced the pads on my AKG Q701 headphones today for the 4th time. It made me realize that I’ve used these headphones for at least 40 hours a week for 14 years straight. I’ve had to repair the left side speaker solder joint a few times, but they’re designed to be easily torn down and repaired. Truly BIFL headphones.
I’ve heard that the newer AKG K702 headphones are identical but I can’t vouch for that. They go for around $250.
Plot twist: they listen exclusively to Russian shortwave numbers stations.
-
Plot twist: they listen exclusively to Russian shortwave numbers stations.
Close. I originally got them exclusively for ASMR listening, when ASMR was a brand new concept.
-
Close. I originally got them exclusively for ASMR listening, when ASMR was a brand new concept.
Did you also burn your tongue because you ate pizza before it was cool?
-
I replaced the pads on my AKG Q701 headphones today for the 4th time. It made me realize that I’ve used these headphones for at least 40 hours a week for 14 years straight. I’ve had to repair the left side speaker solder joint a few times, but they’re designed to be easily torn down and repaired. Truly BIFL headphones.
I’ve heard that the newer AKG K702 headphones are identical but I can’t vouch for that. They go for around $250.
I’d had a pair of K702s, and yes, the whole family is more or less just slight tweaks (K701, K701, K712, K7XX, Q701). I did have a part that kept wearing out though, the little elastic bands that let it auto adjust. They sell the part cheap, but since you need to order them from AKG, the shipping was killing me. I ended up modding them to not longer auto adjust but just fit my head specifically.
Edit: I’d like to shout out to Beyerdynamic for also being on this “headphones that just won’t die” train. My DT-770s are easily as old as OPs.
-
I replaced the pads on my AKG Q701 headphones today for the 4th time. It made me realize that I’ve used these headphones for at least 40 hours a week for 14 years straight. I’ve had to repair the left side speaker solder joint a few times, but they’re designed to be easily torn down and repaired. Truly BIFL headphones.
I’ve heard that the newer AKG K702 headphones are identical but I can’t vouch for that. They go for around $250.
The faux leather on my Beyerdynamic DT770 started chipping off the moment the Chinese bought Beyerdynamic. Go figure
-
I replaced the pads on my AKG Q701 headphones today for the 4th time. It made me realize that I’ve used these headphones for at least 40 hours a week for 14 years straight. I’ve had to repair the left side speaker solder joint a few times, but they’re designed to be easily torn down and repaired. Truly BIFL headphones.
I’ve heard that the newer AKG K702 headphones are identical but I can’t vouch for that. They go for around $250.
Any headphones without a replaceable cable is just trash.
Usually the phones last forever. Its the cable that’s the weak point
-
I replaced the pads on my AKG Q701 headphones today for the 4th time. It made me realize that I’ve used these headphones for at least 40 hours a week for 14 years straight. I’ve had to repair the left side speaker solder joint a few times, but they’re designed to be easily torn down and repaired. Truly BIFL headphones.
I’ve heard that the newer AKG K702 headphones are identical but I can’t vouch for that. They go for around $250.
I recently treated myself to these Hifiman Arya Organic headphones along with a balanced cable and a proper audiophile DAC. Really hoping they last as long as yours, because I’m so extremely happy with them.
-
Any headphones without a replaceable cable is just trash.
Usually the phones last forever. Its the cable that’s the weak point
Little bit of dremeling and most headphones can be changed.
Stock K550’s didn’t have a detachable cord. Later variants did. I usually recable them so I can use them with all my amps.
Not the prettiest cause my hand slipped and made a gouge and time has scuffed it from plugging/unplugging but it’s been fine for 10+ years.
I also swapped out the 3 pin for 4 pin on a similar set as the OPs as well.
-
I replaced the pads on my AKG Q701 headphones today for the 4th time. It made me realize that I’ve used these headphones for at least 40 hours a week for 14 years straight. I’ve had to repair the left side speaker solder joint a few times, but they’re designed to be easily torn down and repaired. Truly BIFL headphones.
I’ve heard that the newer AKG K702 headphones are identical but I can’t vouch for that. They go for around $250.
I have the Chinese clone version of these, Superlux HD681-AIR. They’re only $25-30 but have flat mids, deep (but not overwhelming) bass that extends below 20Hz, and slightly siblant highs that can be fixed in EQ—but what really sells them for me is the perfect soundstage and imaging. You get amazing 3D audio from two drivers with no fancy software gimmicks required. In games you can pinpoint sounds with millimeter precision. And naturally this (along with the excellent bass response) makes them ideal for music and movies as well. It’s A near perfect headphone for the gaming/entertainment PC.
No joke, I’ve bought and returned $500 planar magnetic headphones that didn’t sound as good as these. That said, I’d recommend getting a good pair of velour earpads because the ones in the box are flimsy and cause ear pain. But for the price it is impossible to do better.
https://diyaudioheaven.wordpress.com/headphones/measurements/brand-superlux/hd681-air/
https://www.rtings.com/headphones/reviews/superlux/hd-681 (this review is for the older, non AIR model but the two headphones are identical, other than a resistor added to the drivers in the AIR version to help address the siblance issue.)
-
I recently treated myself to these Hifiman Arya Organic headphones along with a balanced cable and a proper audiophile DAC. Really hoping they last as long as yours, because I’m so extremely happy with them.
As a fan of Hifiman headphones… good luck. Their reputation is more or less the opposite of AKG and Beyerdynamic for this sort of thing. I baby my HE-6 because they are irreplaceable.
-
Little bit of dremeling and most headphones can be changed.
Stock K550’s didn’t have a detachable cord. Later variants did. I usually recable them so I can use them with all my amps.
Not the prettiest cause my hand slipped and made a gouge and time has scuffed it from plugging/unplugging but it’s been fine for 10+ years.
I also swapped out the 3 pin for 4 pin on a similar set as the OPs as well.
Pardon my ignorance, please.
What are those connectors?
-
Pardon my ignorance, please.
What are those connectors?
They are 4-pin mini-xlr on my headphones. The Q701 had a 3 pin variant originally. Most headphones wire the ground wires from both drivers together. 4 pins instead keeps them separate. I can then use different cables to either keep them 4 pins or merge them again into three pin.
The reason for this is I have certain amps that only work with them being separated.
-
They are 4-pin mini-xlr on my headphones. The Q701 had a 3 pin variant originally. Most headphones wire the ground wires from both drivers together. 4 pins instead keeps them separate. I can then use different cables to either keep them 4 pins or merge them again into three pin.
The reason for this is I have certain amps that only work with them being separated.
That’s quite interesting. I can see the benefits offered by each arrangement, curious to me that they opted to swap pin functions from 3-to-4 (as opposed to adding the extra ground on the extra pin and keeping everything else the same,) but I suppose this also ensures that things don’t ‘half-work in a weird way’ if someone uses the wrong connection method.
