For those that keep saying wind turbines can't be reused or recycled need to read this
-
For those that keep saying wind turbines can't be reused or recycled need to read this
"The analysis found a total 99.9% material recovery – calculating that 79.5% of the wind farm’s components were recycled and 20.4% were reused or retained as spare parts, keeping nearly all material out of landfills."
100% of the recycling and component retention took place in the UK, supporting domestic green jobs and at least 10 supply chain companies.
-
For those that keep saying wind turbines can't be reused or recycled need to read this
"The analysis found a total 99.9% material recovery – calculating that 79.5% of the wind farm’s components were recycled and 20.4% were reused or retained as spare parts, keeping nearly all material out of landfills."
100% of the recycling and component retention took place in the UK, supporting domestic green jobs and at least 10 supply chain companies.
@ar387 The more important question is how many years did that wind farm run before needing to be decommissioned. When we compare various energy systems this is an important consideration.
-
For those that keep saying wind turbines can't be reused or recycled need to read this
"The analysis found a total 99.9% material recovery – calculating that 79.5% of the wind farm’s components were recycled and 20.4% were reused or retained as spare parts, keeping nearly all material out of landfills."
100% of the recycling and component retention took place in the UK, supporting domestic green jobs and at least 10 supply chain companies.
It's almost as if the people who said it was impossible to recycle wind turbines were lying.
-
For those that keep saying wind turbines can't be reused or recycled need to read this
"The analysis found a total 99.9% material recovery – calculating that 79.5% of the wind farm’s components were recycled and 20.4% were reused or retained as spare parts, keeping nearly all material out of landfills."
100% of the recycling and component retention took place in the UK, supporting domestic green jobs and at least 10 supply chain companies.
@ar387 Just last week i was talking about this with someone and I said I suspected the non recyclability to be a myth at best, misinformation at worst. This seems to confirm that, thanks for pointing out. -
For those that keep saying wind turbines can't be reused or recycled need to read this
"The analysis found a total 99.9% material recovery – calculating that 79.5% of the wind farm’s components were recycled and 20.4% were reused or retained as spare parts, keeping nearly all material out of landfills."
100% of the recycling and component retention took place in the UK, supporting domestic green jobs and at least 10 supply chain companies.
@ar387
I’m Rania from Gaza
We lost our home, and now my children and I are living in a fragile tent with no protection from the cold, heat, or insects.
My children suffer every day, and I am unable to provide their basic needs
Please don’t leave us alone. Any donation or share could help us survive
🤍
Help & donation link in bio. -
For those that keep saying wind turbines can't be reused or recycled need to read this
"The analysis found a total 99.9% material recovery – calculating that 79.5% of the wind farm’s components were recycled and 20.4% were reused or retained as spare parts, keeping nearly all material out of landfills."
100% of the recycling and component retention took place in the UK, supporting domestic green jobs and at least 10 supply chain companies.
@ar387 What UK is doing with the glasfiber in the rotors, which is normally not recyclable and can only be burned in specialized facilities with ultra high temperatures
-
For those that keep saying wind turbines can't be reused or recycled need to read this
"The analysis found a total 99.9% material recovery – calculating that 79.5% of the wind farm’s components were recycled and 20.4% were reused or retained as spare parts, keeping nearly all material out of landfills."
100% of the recycling and component retention took place in the UK, supporting domestic green jobs and at least 10 supply chain companies.
@ar387 I was particularly interested in how they were recycling the old turbine blades. Here in the US we've seen so many reports of the blades just ending up in landfills because the composites are so difficult to handle. Looks like Plaswire has an innovative approach that should stand as an example to others.
-
For those that keep saying wind turbines can't be reused or recycled need to read this
"The analysis found a total 99.9% material recovery – calculating that 79.5% of the wind farm’s components were recycled and 20.4% were reused or retained as spare parts, keeping nearly all material out of landfills."
100% of the recycling and component retention took place in the UK, supporting domestic green jobs and at least 10 supply chain companies.
@ar387 Interesting.
I was informed by an associate in the field, that more goes into reprocessing the blades, than the actual benefit over competing clean energy metrics.
Then again, how many of the principals are supplying accurate data, and to whom?
-
For those that keep saying wind turbines can't be reused or recycled need to read this
"The analysis found a total 99.9% material recovery – calculating that 79.5% of the wind farm’s components were recycled and 20.4% were reused or retained as spare parts, keeping nearly all material out of landfills."
100% of the recycling and component retention took place in the UK, supporting domestic green jobs and at least 10 supply chain companies.
@ar387 a canal restoration project in England just installed Lock Gates made from up-cycled end-of-life Dutch wind turbine blade(s).
-
For those that keep saying wind turbines can't be reused or recycled need to read this
"The analysis found a total 99.9% material recovery – calculating that 79.5% of the wind farm’s components were recycled and 20.4% were reused or retained as spare parts, keeping nearly all material out of landfills."
100% of the recycling and component retention took place in the UK, supporting domestic green jobs and at least 10 supply chain companies.
@ar387 this is great news
I can't help chuckling at "turbine circularity" - like, that's obvious if you watch them for 5 minutes -
@ar387 What UK is doing with the glasfiber in the rotors, which is normally not recyclable and can only be burned in specialized facilities with ultra high temperatures
-
For those that keep saying wind turbines can't be reused or recycled need to read this
"The analysis found a total 99.9% material recovery – calculating that 79.5% of the wind farm’s components were recycled and 20.4% were reused or retained as spare parts, keeping nearly all material out of landfills."
100% of the recycling and component retention took place in the UK, supporting domestic green jobs and at least 10 supply chain companies.
@ar387 It makes you wonder who has been spreading lies. I'd note, for comparison, that neither gas nor coal can be recycled, though I believe wood ash is a useful waste product.
-
@radicalabacus @schnedan @ar387
It just delays the inceneration/landfill step. There are currently 33000 blades in the UK to replace and we need better solutions than shredding them to mix with even more plastic. It looks nice in the headlines, which is the main reason for doing it, but we're creating an even more difficult recycling problem for the future.
-
@radicalabacus @schnedan @ar387 Will the new products with RX Polymer end up in a landfill after use? How to make sure that the material is separated from plastics that can be recycled?
-
@radicalabacus @schnedan @ar387
It just delays the inceneration/landfill step. There are currently 33000 blades in the UK to replace and we need better solutions than shredding them to mix with even more plastic. It looks nice in the headlines, which is the main reason for doing it, but we're creating an even more difficult recycling problem for the future.
-
@radicalabacus @schnedan @ar387 Will the new products with RX Polymer end up in a landfill after use? How to make sure that the material is separated from plastics that can be recycled?
@rard @schnedan @ar387 I don't know; maybe RX Polymer can be recycled at least a couple more times (but I'm just speculating, and that still sends it to landfill/incineration eventually). I'd love to see turbine blades that could be more circularly recycled or even composted, but I suspect that only works for small turbines
-
@radicalabacus @geoffl @ar387 "but a material/process that could be a bit more fully circular would be an improvement."
Yes but so far that means: less stability, more weight, less efficiency, more cost.
Then you can use materials which allow full recycling.
In Germany the press said: you can't made this much railway sleepers or park benches. At least you need to burn these materials. And in Germany - to my knowledge - there is only one plant which can burn glasfiber - and it's way to small to process the amounts comming.
-
@radicalabacus @schnedan @ar387 Will the new products with RX Polymer end up in a landfill after use? How to make sure that the material is separated from plastics that can be recycled?
@rard @radicalabacus @ar387 "How to make sure that the material is separated from plastics that can be recycled?"
Doubt it's possible
-
@radicalabacus @geoffl @ar387 "but a material/process that could be a bit more fully circular would be an improvement."
Yes but so far that means: less stability, more weight, less efficiency, more cost.
Then you can use materials which allow full recycling.
In Germany the press said: you can't made this much railway sleepers or park benches. At least you need to burn these materials. And in Germany - to my knowledge - there is only one plant which can burn glasfiber - and it's way to small to process the amounts comming.
@schnedan @radicalabacus @ar387
I can't find products made from "Plaswire's smart RX Polymer" for sale anywhere, it looks like more greenwashing. Last year Plaswire were jumping on the blockchain bandwagon.
-
@radicalabacus @geoffl @ar387 "but a material/process that could be a bit more fully circular would be an improvement."
Yes but so far that means: less stability, more weight, less efficiency, more cost.
Then you can use materials which allow full recycling.
In Germany the press said: you can't made this much railway sleepers or park benches. At least you need to burn these materials. And in Germany - to my knowledge - there is only one plant which can burn glasfiber - and it's way to small to process the amounts comming.
@schnedan @geoffl @ar387 I guess the practical problems to solve are finding uses for RX Polymer and finding better turbine blade materials. No large power generation company is going to want to lose efficiency/profit. I'd rather power generation was not for profit but I'd rather they add wind generation capacity than gas or coal. Maybe they could be encouraged to use more recyclable materials through taxation it their current concern is lower profit?
