Did you know that 3D printed covers for Flock cameras are easily printed and make cameras inoperable when you plop them on using a pole?
-
@mathowie seems like adding some epoxy to make sure it correctly protects the camera would be a good idea
@fullywoolly @mathowie hahaha and maybe some sort of Faraday-style layer to “protect” the RF receivers would also be “helpful”
-
Did you know that 3D printed covers for Flock cameras are easily printed and make cameras inoperable when you plop them on using a pole?
I share this information for no reason at all.
-
Did you know that 3D printed covers for Flock cameras are easily printed and make cameras inoperable when you plop them on using a pole?
I share this information for no reason at all.
@mathowie @LoganFive oh, hey. This sounds like info I might want to include in the Flock zine I want to make.
-
@fullywoolly @mathowie hahaha and maybe some sort of Faraday-style layer to “protect” the RF receivers would also be “helpful”
@scott @fullywoolly @mathowie spray cans are cheaper…
-
Did you know that 3D printed covers for Flock cameras are easily printed and make cameras inoperable when you plop them on using a pole?
I share this information for no reason at all.
@mathowie Just make sure you unload the yellow filament from your printer, to ensure they can’t track it back to you.
-
Did you know that 3D printed covers for Flock cameras are easily printed and make cameras inoperable when you plop them on using a pole?
I share this information for no reason at all.
Actually, importantly, this isn't going to do shit to hurt the camera and everyone knows this.
I wonder if it would be easier to apply if the back was made of tabs that spread open and snapped it on. Then you could just slap it on and be gone. It would also reduce material costs and print time. Don't have to change much about the model--just remove some sections of the back and round them out.
Might also reduce the face plate area to just over the lens. Less is more.
-
Did you know that 3D printed covers for Flock cameras are easily printed and make cameras inoperable when you plop them on using a pole?
I share this information for no reason at all.
@mathowie Other cams to cover: Certainly for no obvious reason.
-
Did you know that 3D printed covers for Flock cameras are easily printed and make cameras inoperable when you plop them on using a pole?
I share this information for no reason at all.
@mathowie I'd bet pointing a high powered laser into the lens from 3 blocks away would fuck them up for less $, time, and risk. But I am only speculating.
-
Did you know that 3D printed covers for Flock cameras are easily printed and make cameras inoperable when you plop them on using a pole?
I share this information for no reason at all.
@mathowie I am not American so didn't pick up on the Flock camera controversy until recently. I'm missing the background. Why are they so much more of a problem then speed cameras deployed all over Europe? Is it because they are privately owned and operated for profit rather than installed by police/local govt?
-
@mathowie I am not American so didn't pick up on the Flock camera controversy until recently. I'm missing the background. Why are they so much more of a problem then speed cameras deployed all over Europe? Is it because they are privately owned and operated for profit rather than installed by police/local govt?
@pthane @mathowie They are connected to an AI network, and their purpose is to build records of everyone's travel. A speed camera (I do oppose these too) by comparison supposedly does not record any passing car that is not speeding, though there are now some speed cameras that double as license plate reader/logger cameras against ALL traffic. Thus all are targets
-
@pthane @mathowie They are connected to an AI network, and their purpose is to build records of everyone's travel. A speed camera (I do oppose these too) by comparison supposedly does not record any passing car that is not speeding, though there are now some speed cameras that double as license plate reader/logger cameras against ALL traffic. Thus all are targets
@LukefromDC @mathowie Thanks. So it's the date retention and misuse that's the problem.
-
@LukefromDC @mathowie Thanks. So it's the date retention and misuse that's the problem.
@pthane @mathowie Well, all use of data obtained by mass surveillance either is misuse or the thin end of a wedge that is guaranteed to lead to misuse.
A stolen car found by a flock camera today is a political enemy of a Mayor, governor, or President pulled over, maybe beaten by police, and unlawfully arrested tomorrow.
Flock cameras also force people to spend time identifying and using bypass routes and extra fuel to go around the cameras.
-
@mathowie seems like adding some epoxy to make sure it correctly protects the camera would be a good idea
I'm guessing the idea is they can be disabled without damaging them, so a person can't be arrested for criminal damage.
-
Did you know that 3D printed covers for Flock cameras are easily printed and make cameras inoperable when you plop them on using a pole?
I share this information for no reason at all.
@mathowie Why do tech people always reach for a tech solution?
-
Did you know that 3D printed covers for Flock cameras are easily printed and make cameras inoperable when you plop them on using a pole?
I share this information for no reason at all.
@mathowie well, the camera at least.
-
Did you know that 3D printed covers for Flock cameras are easily printed and make cameras inoperable when you plop them on using a pole?
I share this information for no reason at all.
I wonder if, hypotethically and only for educational purposes, of course, if instead of covering the lens with an opaque cover it would be more effective to cover it with something that distorts the image it sees instead -- like a fog filter, or a pane of glass smeared with vaseline or similar. Something that might not be immediately apparent when looking at the output.
-
@mathowie I am not American so didn't pick up on the Flock camera controversy until recently. I'm missing the background. Why are they so much more of a problem then speed cameras deployed all over Europe? Is it because they are privately owned and operated for profit rather than installed by police/local govt?
@pthane @mathowie they contain high tech wireless tracking technology which can identify you by your phone and track individuals in their cars without the camera feature at all. Wifi mac addresses, bluetooth, cellular, anything identifiable wiill be tracked and assigned to a particular person's profile. Then there's the fact of how often these systems are wrong. Especially if your skin isn't white, because the training data was was overwhelmingly white people. Many people have faced police action and false incarceration when a flock camera in another state claims that someone who doesn't even live there has committed a crime and the police act before verifying. All kinds of "problems" which are actually features.
-
@pthane @mathowie they contain high tech wireless tracking technology which can identify you by your phone and track individuals in their cars without the camera feature at all. Wifi mac addresses, bluetooth, cellular, anything identifiable wiill be tracked and assigned to a particular person's profile. Then there's the fact of how often these systems are wrong. Especially if your skin isn't white, because the training data was was overwhelmingly white people. Many people have faced police action and false incarceration when a flock camera in another state claims that someone who doesn't even live there has committed a crime and the police act before verifying. All kinds of "problems" which are actually features.
-
@LukefromDC @mathowie Thanks. So it's the date retention and misuse that's the problem.
@pthane @LukefromDC @mathowie This has been going on for ages with people using public transport, but since they are lower on the social ladder, it hasn’t been seen as much of a problem.
But this messes with car people, and boy shouldn’t you mess with car people.
All mass surveillance and data retention from it is bad, but there’s a strong smell of privilege over this outrage.
-
Did you know that 3D printed covers for Flock cameras are easily printed and make cameras inoperable when you plop them on using a pole?
I share this information for no reason at all.
@mathowie that also looks like a good piece to mix slow curing resin in. How you dispose of it is up to you, but that curved bowl part looks ideal
