This vertical mouse is pretty neat
-
Using a soldering iron, a replacement 3D printed shell from Aliexpress, and onboard storage for the configuration, I’m dragging my mouse kicking and screaming into years it was never designed to reach.
Granted, it should have been designed to.
I don’t know about the Lemmy com as much, but the vibe I used to get from the Reddit BIFL community sometimes horsehoed back around to being something materialistic. I feel like avoiding planned obsolescence is important but so is maintaining stuff. I think maintaining stuff is flat out more important than finding the perfect stuff especially in the age of fast mass market everything.
I also repair my mice when the buttons start breaking.
So to call it BIFL it must check at least one but ideally both of these boxes for me:
- lasts very long right out of the box
- is designed to be repairable with existing spare parts
- lasts very long right out of the box
-
I’ve tried a vertical mouse very similar to this one and they relieve carpal tunnel a bit until they cause it again in a different way. Because it still fully rotates your arm it’s not great. I have used ‘hybrid’ mice now for a few years with success. A hybrid mouse is rotated halfway between a regular mouse and a vertical mouse.
I have used ‘hybrid’ mice now for a few years with success.
Which one have you been using?
-
Looks neat. Are there any indications that this will last for life though?
Its a bootleg MX Vertical. Better off investing in a Logitech MX range tbh. Had mines for a decade.
Unsure why OP thinks they are ridiculously priced… Actually worth every penny.
You can swap the battery and the older ones had a flaw with the thumb button, but it’s repairable. Software is well supported on everything and opensource drivers exist so it doesnt matter if Logitech kills support.
-
I’m curious. You use a stylus as a mouse replacement? Do you have a screen on your stylus for precision or is it just muscle memory?
You could definitely set it up as any regular touchpad so the movement is relative to the mouse, but making it act as an identical second touchscreen is also possible
-
Yeah, I’ve had the same one for years. I had absolutely destroyed my wrist and had to have surgery on it, and that bad boy saved my life. I even use it to play FPS games and I’m no worse than I was with a traditional mouse.
+1 for MX Vertical. No issues with FPS games whatsoever
-
I’m curious. You use a stylus as a mouse replacement? Do you have a screen on your stylus for precision or is it just muscle memory?
I’m curious. You use a stylus as a mouse replacement? Do you have a screen on your stylus for precision or is it just muscle memory?
muscle memory. I don’t even need to drag or move the cursor from one end of the screen to the other. I can just “touch” the other side and cursor jumps.
And when you need more precision (and feedback), hovering the stylus above the tablet is enough to move the cursor before touching.
-
I also repair my mice when the buttons start breaking.
So to call it BIFL it must check at least one but ideally both of these boxes for me:
- lasts very long right out of the box
- is designed to be repairable with existing spare parts
second that
- lasts very long right out of the box
-
I understand. What about semi-vertical models?
The semi-vertical ones help compared to a standard (horizontal) mouse, but as someone who had a lot of pain, they were not enough for me. For example, I had the Microsoft sculpt mouse, which came with their split keyboard (the main reason I bought it) and still experienced pain. Then I went more vertical to the Logitech Lift which was better, but did not eliminate the pain entirely. Finally, I now use the Evoluent Vertical mouse and now no longer experience pain in my mousing hand.
The only drawback is when I used a standard mouse (totally horizontal), I used to switch hands and use it ambidextrously. Now I obviously can’t switch hands with these mice.
I think for someone who doesn’t experience persistent pain, a semi-vertical mouse may be well enough.
-
Using a soldering iron, a replacement 3D printed shell from Aliexpress, and onboard storage for the configuration, I’m dragging my mouse kicking and screaming into years it was never designed to reach.
Granted, it should have been designed to.
I don’t know about the Lemmy com as much, but the vibe I used to get from the Reddit BIFL community sometimes horsehoed back around to being something materialistic. I feel like avoiding planned obsolescence is important but so is maintaining stuff. I think maintaining stuff is flat out more important than finding the perfect stuff especially in the age of fast mass market everything.
I don’t know about the Lemmy com as much, but the vibe I used to get from the Reddit BIFL community sometimes horsehoed back around to being something materialistic. I feel like avoiding planned obsolescence is important but so is maintaining stuff.
BIFL threads help with which brands to avoid and which to prioritise when you need to buy. I’m also subscribed to repair communities like !diy@lemmy.ml where the focus is on “maintaining stuff”. I think of BIFL as breadcrumbs for people who are sick of paying for things that won’t last a year’s use. We all value, i assume, what you wrote above.
-
It was very affordable (sub $20), came in lots of colours (including this lilac colour that I love!), and is super comfortable too. The vertical mouse I used previously, a Ugreen one, had a narrower grip that was less than ideal.
The mouse is by “Sanwa Supply”, model number “GMAERGWBT22V” (V for violet I presume, it shows up at just “BT22” when pairing with Bluetooth), though I’m sure there are plenty of identical models from other brands.
The plastic finish is nice and will last a long time, as there isn’t rubber everywhere like on the ridiculously priced MX Masters. The buttons are silent and have a nice click, the side buttons for forwards/backwards are nicely placed, you can switch between 3 devices (two Bluetooth, one with the dongle), and the scroll wheel is nice (though not a metal one)
The mouse came with a magnetically attached wrist rest too, which is nice, and even without it, it does not suffer from the trailing pinky finger issue of other vertical mice. The magnets are strong enough where it isn’t super loose but not too strong where it’s hard to detach. It’s a nice bonus when I’m at my desk for long hours, and it can be removed if I need to pack it.
BUT one of the main reasons I bought it, aside from the fantastic colours, is that you can use it with a AA battery! No glued in nonsense, it’s super easy to swap it out, and the dongle is also stored in the battery compartment too (always a nice bonus). I use it with rechargeable IKEA Ladda batteries, and it’s been awesome.
I wish Ploopy made a vertical mouse!
-
I had sooo many mice that seemed to have good build quality. But then one day one mouse button starts breaking: doing double clicks instead of single clicks or not registering that I keep the button pressed making drag and drop impossible. Or the scroll wheel sporadically scrolling in the wrong direction.
No mouse, cheap or expensive, that I bought was ever for life and I doubt that this one is.
Its a cool mouse though and I might consider buying it if I was currently in need of one.
It’s always a case of time for these kinds of things, yeah. I doubt it’ll last of a lifetime, the switches will eventually wear out
-
Do they only sell through Amazon?
I bought one through some Chinese ecommerce site (I think Aliexpress?), not sure if it’s on Amazon (in any case, you’re feeding some weird billionaire)
edit: It is on Amazon, for $30!
-
It was very affordable (sub $20), came in lots of colours (including this lilac colour that I love!), and is super comfortable too. The vertical mouse I used previously, a Ugreen one, had a narrower grip that was less than ideal.
The mouse is by “Sanwa Supply”, model number “GMAERGWBT22V” (V for violet I presume, it shows up at just “BT22” when pairing with Bluetooth), though I’m sure there are plenty of identical models from other brands.
The plastic finish is nice and will last a long time, as there isn’t rubber everywhere like on the ridiculously priced MX Masters. The buttons are silent and have a nice click, the side buttons for forwards/backwards are nicely placed, you can switch between 3 devices (two Bluetooth, one with the dongle), and the scroll wheel is nice (though not a metal one)
The mouse came with a magnetically attached wrist rest too, which is nice, and even without it, it does not suffer from the trailing pinky finger issue of other vertical mice. The magnets are strong enough where it isn’t super loose but not too strong where it’s hard to detach. It’s a nice bonus when I’m at my desk for long hours, and it can be removed if I need to pack it.
BUT one of the main reasons I bought it, aside from the fantastic colours, is that you can use it with a AA battery! No glued in nonsense, it’s super easy to swap it out, and the dongle is also stored in the battery compartment too (always a nice bonus). I use it with rechargeable IKEA Ladda batteries, and it’s been awesome.
You can tell it’s neat because of the way that it is
-
i too was surprised to see this in “for life”.
in my experience, no mouse can be bought for life
This community also allows for things that just last significantly longer than usual
-
I had sooo many mice that seemed to have good build quality. But then one day one mouse button starts breaking: doing double clicks instead of single clicks or not registering that I keep the button pressed making drag and drop impossible. Or the scroll wheel sporadically scrolling in the wrong direction.
No mouse, cheap or expensive, that I bought was ever for life and I doubt that this one is.
Its a cool mouse though and I might consider buying it if I was currently in need of one.
But then one day one mouse button starts breaking: doing double clicks instead of single clicks or not registering that I keep the button pressed making drag and drop impossible.
I had that happen recently on a logitech G600 (apparently a lot of models of logitech mice use switches that are prone to early failure/hysteresis). I was able to purchase some replacement switches and fix it, though it did require a soldering iron and some rudimentary skills with it to do successfully (it’d actually make for a great first project to learn on).
I think most mice use the same generic switch design, so that should be viable to do with most of them once they start failing.
-
I bought one through some Chinese ecommerce site (I think Aliexpress?), not sure if it’s on Amazon (in any case, you’re feeding some weird billionaire)
edit: It is on Amazon, for $30!
Oh, if can’t buy elsewhere than the two then unfortunately it isn’t an option for me. Hoped it would be possible since it’s supposedly Japanese. Are you sure the AliExpress one isn’t a knockoff then? Couldn’t find the other colors from the company itself.
-
This community also allows for things that just last significantly longer than usual
This community also allows for things that just last significantly longer than usual
for some of us that’s already “life”
life is “significantly longer than usual” indeed
-
Oh, if can’t buy elsewhere than the two then unfortunately it isn’t an option for me. Hoped it would be possible since it’s supposedly Japanese. Are you sure the AliExpress one isn’t a knockoff then? Couldn’t find the other colors from the company itself.
Just checked Amazon, it is for sale with all four colours (though you do have the Amazon tax)
A bit unfortunate it’s not sold in other stores though
-
I don’t know about the Lemmy com as much, but the vibe I used to get from the Reddit BIFL community sometimes horsehoed back around to being something materialistic. I feel like avoiding planned obsolescence is important but so is maintaining stuff.
BIFL threads help with which brands to avoid and which to prioritise when you need to buy. I’m also subscribed to repair communities like !diy@lemmy.ml where the focus is on “maintaining stuff”. I think of BIFL as breadcrumbs for people who are sick of paying for things that won’t last a year’s use. We all value, i assume, what you wrote above.
I’m sure that’s the case but in retrospect when I look back on Reddit and how it turned into a genuinely trusted but super astroturfable place I can only remember the original sub as nothing but “hey guys check out this product I purchased for myself and then wife and child and friends”
-
Always laughed at it, but once my wrist started hurting I gave it a try. Now I’m laughing because my wrist doesn’t hurt.
